<% 'Page Author: Global Web Solutions Inc. 'Creation Date: 'Author Comments: Option Explicit Response.Buffer = True 'For browsers (set expiration date some time well in the past) Response.Expires = -1000 'For HTTP/1.1 based proxy servers Response.CacheControl = "no-cache" 'For HTTP/1.0 based proxy servers Response.AddHeader "Pragma", "no-cache" %> RBR Tactical Armor Inc. NIJ level IIIA Combat helmet
[an error occurred while processing this directive]
[an error occurred while processing this directive]
 

Available on GSA Contract

Optional Head Harness

US Mil-Spec Removable Padding system:

 

The MACH II is available in medium (7 ¼ and below) and large (7 ¼ and above) in a full spectrum of tactical colors:  Black, OD, Navy Blue & Coyote Tan. 

  • Size Medium Weight: 2.7 lbs.

    • Ballistic Testing

    RBR Ballistic Helmets are tested at H.P. White Laboratory at Level IIIA. Helmets are tested verses penetration and back face deformation of Level IIIA 9mm and .44 Magnum ammunition, to the HP White Helmet Test Procedure (HPW-TP-0401.01B) Additionally, This test requires that one of each of the above rounds must impact directly on a suspension system fastener resulting in zero penetration. RBR Test Results are available upon request.

     

    Browse the RBR MACH IV Helmet at RBR Shop Online!

     

    Related Items:

     

    RBR Combat MK-II Helmet (IIIA)

    RBR PASGT Helmet (IIIA)

    RBR Combat Helmet (IIIA)

    RBR MACH I Helmet (IIIA)

    RBR MACH III Helmet (IIIA)

    RBR MACH IV Helmet (IIIA)

    RBR Helmet Covers

    RBR Faceshields

    Peltor© Communications Systems

     

    The RBR MACH II Advanced Combat Helmet

    Buy the RBR MACH II Helmet at RBR Shop Online!

    Helmet Data Sheet in .PDF (Requires Acrobat Reader®)

    RBR MILITARY MACH II ADVANCED COMBAT HELMET

    The RBR MACH II Helmet is a versatile combination of the Mach I and Mach III. It provides the optimal lightweight construction of the Mach III to the maximum coverage found in the Mach I. Tested and approved by the US Army Airborne Test Center.

    The MACH II was designed for Military and Police special tactical units where compatibility with all NV and communication systems is of critical importance along with wearer comfort.  Helmets provide un-matched Level IIIA protection and include the RBR 4 point suspension system secured with only four bolts to ensure maximum ballistic integrity, comfort and stability.

    The RBR Mach II Helmet is fitted with a fully adjustable padded head harness, attached via four (4) fastener screws.  The head harness includes leather covered front padding, nylon covered rear padding, and a net mesh and leather comfort crown pad.  RBR Helmets are fully adjustable in the circumference as well as the wearing height, therefore, two sizes can be adjusted to fit all heads.

    Testing is Critical to Performance
    Commonly found misconceptions include NIJ Certified IIIA helmets. The NIJ Certification for helmets only provides for testing up to level II, and does not measure back face deformation. Likewise, Level IIIA Testing to NIJ Standard 0108.01 for Ballistic Material is for testing flat armor panels only, and "specifically excludes" helmets from being tested to this standard. RBR is confident that the HP White Helmet Test Procedure is the most comprehensive helmet test standard currently available. Helmets that cannot meet the requirements of this Level IIIA test should be considered substandard.